|
JAI
Product |
| Cryogenic Sample
Crusher |
| The JFC series of cryogenic sample crushers
consist of a cell, a tungsten carbide steel ball. The sample and the
steel ball are placed inside the cell which is attached to a crush
rod and the rod is attached to the main unit. The cell is immersed
in liquid nitrogen to cool the sample and the steel ball. Then the
crush rod is set in motion by reciprocating up and down and causes
the steel ball inside the cell to pound the sample into a fine
powder. |
JFC-300
Outline
Maximum of 3 g sample in the JFC-300 cell can be crushed. |
|
JFC-300
|
Feature
Example of crushable polymer material and the amount
•Polyacetal, hard PVC, soft PVC, silicone rubber, printed
circuit board, vulcanized IIR, cellulose, tire, etc.
•Maximum of 3 g sample in the JFC-300 cell can be crushed.
•For HDPE 1.5 g is the maximum allowed in the JFC-300 cell. |
|
JFC-1500 Outline
Maximum of 15 g sample in the JFC-1500 cell can be crushed.
Also max.4 different samples can be crushed simultaneously. |
|
JFC-1500 |
Feature
Example of crushable polymer material and the amount
•Polyacetal, hard PVC, soft PVC, silicone rubber,
printed circuit board, vulcanized IIR, cellulose, tire,
etc.
•Maximum of 15 g sample in the JFC-1500 cell can be
crushed.
•For HDPE 7.5 g is the maximum allowed in the JFC-1500
cell. |
|
